Shipping list:
Onlg charger: E-300 18650/26650 Charger *1+ tracking number*1
EU plug: E-300 charger*1 +12V 1.5A EU ADAPTE *1 + tracking number*1
US plug:E-300 charger*1 + 12V 1.5A US ADAPTE*1 + tracking number*1
Options
USB port output voltage at the load: 4.9V-5.30 V;
Output Current: 1000 m;
load current: <1 m;
when the load current is 800 m, its port output voltage: 4.8V-5.25 V;
stop output overvoltage protection: 3.0 ± 0.1 V;
Input: DC12V / 1.5A
DC output: 4.2V 500mA / 1000mA * 2
charging cut-off voltage: the lithium-ion battery 4.2 ± 0.05 V,
NiMH Battery 1.42V
constant voltage charging cut-off current: <100 m
External sources of supply current in standby mode: <15.0 m;
charging current
even charging more flexible
LII-300 has two charging current circuit structure, so that it is more flexible, depending on the type and capacity of the battery to determine the size of the charge current selected, the battery safer, saves time.
when you put the battery charging, the system defaults to 500mA of flash in the screen theLCD, within eight seconds selectable 500mA or 1000mA charge current if you do notmake choice within eight seconds, the system will default to 500mA charging time when to switch current choice side you want to turn off the power supply or battery, please.
even charging more secure
products embedded MCU control circuit, real time monitoring of the battery, and has a charge protection during discharge protection, anti-reverse polarity protection and short circuit, so that the battery is always maintained in a safe condition
Fully independent dual-slot design
LII is 300-charger design uses two completely separate exit slot,, independently of each other between the two with each other, as the button corresponding to the control output,, when to charge the battery, the device will automatically detect the battery, nickel-metal hydride batteries or lithium-ion battery, you can charge at the same time for the lithium-ion battery and Ni-MH batteries.
Battery capacity test
If you suspect that you bought at the store is false cell battery, you can put the battery in (Lii-300) were real opportunities to test the charger, a few hours after the charger is real data is displayed on the LCD screen, at this time your heart doubts will be answered.
Operation: Press the Mode button for 3 seconds to switch Surge capacity of the battery test mode, the charger will fully charge the battery, the battery, and then released, and the discharge power to write data when the battery is fully discharged, the battery charger will be recorded in the data displayed on the LCD screen, and battery capacity of the end of the test; Note that the charger will automatically switch to the battery charger model to charge the battery until the battery is fully charged.
Operation Surge modes: charge-discharge-recording Charging
the internal resistance of the battery detection
Lii is-300 microcontroller integrated in the impedance detection function, when placed in the battery, the microcontroller will be the first time to calculate the internal resistance of the battery is displayed on the LCD screen, 2 seconds after the side press the button.
Note: The internal resistance of the battery is detected only for reference, measurement data is sometimes inaccurate.
let bad battery live again
when you do not charge the battery charger in the other, you can try to Lii-300 charger.
engineers on the battery very understanding, Lii-circuitry 300 take into account the problems, even if the battery is bad to live again.
today there are a lot of low-quality equipment, there is no protection for the battery, the battery can cause excessive discharge, or discharge to 0, this time the battery is considered as a bad battery, the loss is really a pity
where Lii is-300 to determine the battery is bad battery (NULL LCD), charger for micro-current release of about 20mA (we called after current), slowly battery voltage of 0 V, it will take some time, when the voltage rises when the voltage platform battery charger will be exchanged for normal charging, bad battery life again.
in accordance with the bad battery case may be, not all bad battery can activate
charge the phone
Lii-300 has a USB 5 V output, the output current of 1000mA, can charge most mobile digital products.
battery into the battery bay, and then connect your phone to charge the battery.
Note: USB output is valid only 3.7 V lithium-ion battery.
USB output can identify most of charging electronic products, does not exclude some products can not be identified.