Introduction
Uses NP-F series battery as power supply, converts output into different voltage and multi-interface system
Provides variety of voltage outputs and interface ports
Fast charge in USB-C also provides Type-C input, it charges NP-F Series batteries
Build with a good heat dissipation performance and Equip with Variety of fitting method
Efficient and Practically Multifunctional power supply system
Greatly prolong shooting time, specially for DSLR recording, Network Bradcast, Livestreaming of Youtube, Tiktok, etc.
Supply Power to compatible devices through DC cable & Type-C cable, like Cell phones, Monitor, Livestreaming device, LED Light, Studio light, some of Camera/camcorder, etc.
Allow to use two USB Port at the same time
There&x27;s cushion sticker on the back, no damage to the connecting devices
User Guide
Professional Advises
1. To avoid cause damage to the product, please pay attention to voltage input and outputs.
2. In order to ensure the service life of the battery and components, the battery should be removed when not in use.
3. Do not store this product in a place with high temperature or high humidity.
4. Do not use this product in an environment where the temperature is higher than 55 degrees or -20 degrees.
5. When this product is working for a long time, please do not touch it to avoid burns.
6. When using or not using this product, place it out of the reach of children.
Special Note
1. USB-A is a common output port, the output voltage is 5V1.5A
2. USB-C is a fast charging output port, and automatically switches 5V2A or 9V2A according to the device protocol
3. The DC12V / 2A interface model is 5.5 * 2.5mm, to avoid burning the product and equipment. Please ensure to use the correct rated voltage and current of the electrical equipment.
4. The DC8V / 3A interface model is 5.5 * 2.1mm, to avoid burning the product and equipment. Please ensure to use the correct rated voltage and current of the electrical equipment. When this interface is input, the battery must be removed. Otherwise, the battery or product will be damaged.
5. When charging the battery, the switch must be turned on to charge the battery (I = On, O = Off).
6. When removing the battery, you must press and hold LOCK to remove the battery. It is not necessary to do so while install the battery.
7. Do not overload this product, and stop using it if the temperature is high.
8. This product has high power, it is recommended to use NP-F970 battery above 7000mah
Compatible with
Work with F330, F550, F750, F770, F970 batteries, etc. (not included)
Good for all smartphones with Type-C port, such as Sam-sung, Oppo, Vivo, Huawei, LG, HTC, Moto, etc.
If you have the original USB charging cable, it supports to charge directly, such as S0NY A9, A7 III, A7R III, A7R II, A7S II
A7M3 A7RM3 A7RM2 A7SM2 A9M2 ILCE-9 A6300 A6500
PANAS0NIC GF9 GF10
CAN0N G1X, NIK0N Z5 and some of Gopro and sport cameras which support to charge when using
Warn
1.Not fit to A7 II (A7M2), A7/A7S/A7R first generation
2.Not support to shoot or record when charging for other cameras, we recommend to buy one more dummy battery in our store to use together
3.The cable to cameras and other smartphones whose port is not Type-C, please use or change to original cable then it will work. If you have lost the original USB data cable, it is useless and not work.
Package Content
1 X Battery Plate for NP-F batteries
1 X 1/4&x27;&x27; Screw Adapter
1 X DC 5.5*2.5mm male to DC 5.5*2.5mm male cable
1 X USB to Type-C cable for charging cell phone/other devices