About Installation system,Note:
1. XPROG 5.55 : Can only support WIN 7 32BIT computer system
2. XPROG 6.12/6.26/6.50 : Can only support WIN 7 64BIT computer system
3. V6.26 and V6.50 new added the functions of V1.36 V850E2 series
Show a few screenshots:
XPROG V6.50
Please Attention For Xprog V6.50 Software Installation Tips:
1. Please use the real WIN 7 64BIT system and close the anti-virus program.
2. Only one xprog version 6.50 software can be placed and installed in the computer, no other xprog software, if there are other software, it will conflict and cause certificate problems
3. Turn on the computer network, the computer time needs to be consistent with the local time.
4. The computer needs to have 2 or more partitions, such as C and D disks. It cannot be an external hard disk, but must be multiple partitions of the computer&x27;s hard disk.
5. MUST first install 6.50 registry, then run V6.50 Software.
6. The product cannot open multiple software interfaces at one time, which will cause the product to enter a locked state Because the system will mistakenly believe that you use the product incorrectly or crack the product, resulting in lock-up.
7. Product can&x27;t be updated.
8.After used,close the software and unplug the usb dongle from the computer.
Please must follow this instructions to run software,otherwise device will not installed.
XPROG V6.26
Please Attention For Xprog V6.26 Software Installation Tips:
1. Please use the real WIN 7 64BIT system and close the anti-virus program.
2. Only one xprog version 6.26 software can be placed and installed in the computer, no other xprog software, if there are other software, it will conflict and cause certificate problems
3. Turn on the computer network, the computer time needs to be consistent with the local time.
4. The computer needs to have 2 or more partitions, such as C and D disks. It cannot be an external hard disk, but must be multiple partitions of the computer&x27;s hard disk.
5. MUST first install 6.26 registry, then run V6.26 Software.
6. The product cannot open multiple software interfaces at one time, which will cause the product to enter a locked state Because the system will mistakenly believe that you use the product incorrectly or crack the product, resulting in lock-up.
7. Product can&x27;t be updated.
8.After used,close the software and unplug the usb dongle from the computer.
Please must follow this instructions to run software,otherwise device will not installed.
Please MUST READ This :
1. Which XPROG version you use , before open software MUST install the right version registry. Otherwise it will runs old version registry automically and then confilt with new hardware and device dead.
2. If your computer no install other old xprog version,it also require install right registry ,otherwise device runs fault and defective .
XPROG V6.12
XPROG-M V6.12 Highlights:
1. Latest Software Version: V6.12, Firmware: V4.4
2. Adds new authorization: AUTH-0028-1 for Renesas V850 Authorized and AUTH-0028-2 for Renesas SuperH Authorized 2017/10/9
3. Operating System: Win7 64BIT
4.Language: English only
Please Attention For Xprog V6.12 Software Installation Tips:
1. Please use the real WIN 7 64BIT system ,Turn off the network and anti-virus programs. Product can&x27;t be updated.
2. Only one xprog version 6.12 software can be placed and installed in the computer, no other xprog software, if there are other software, it will conflict and cause certificate problems
3. The computer needs to have 2 or more partitions, such as C and D disks. It cannot be an external hard disk, but must be multiple partitions of the computer&x27;s hard disk.
4. MUST first install 6.12 registry, then run V6.12 Software.
5. The product cannot open multiple software interfaces at one time, which will cause the product to enter a locked state Because the system will mistakenly believe that you use the product incorrectly or crack the product, resulting in lock-up.
6.After used,close the software and unplug the usb dongle from the computer.
7. Product can&x27;t be updated.
Please must follow this instructions to run software,otherwise device will not installed.
Install Notice:
XPROG-M V6.12 windows system required as below:
1. Windows 7 64 bit required, all the patch software for the windows system should be installed already and the windows properly works well...
2. The windows system should be with at lest 2 partitions (except the CD ROM.)
3. Can not be working with virtual harddisk.
XPROG Box 6.12 Installing Steps:
1. Click the file "installation.reg", get the file information to the regedit.
2. Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwise the Xprog software will not start.
3. Plug the Xprog main interface to the computer, install the USB driver.
4. Copy the folder "XPROG-BOX6.12" to the desktop, and open it, and run the "xprogdesktop.exe", then software open.
XPROG V6.12 Authorizations included:
AUTH-0001 for Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 for Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 for Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 for Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 for Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 for Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 for BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 for MB ZGS001 authorization
AUTH-0011 for Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 for Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 for ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 for ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, Chassis number (VIN), serial number and PIN code).
AUTH-0023-1 MAC7xxx
AUTH-0023-2 XC23xx
AUTH-0024-1 MC9S12Cxx
AUTH-0024-2 MC9S12XE
AUTH-0024-3 9S12XE SECURITY
AUTH-0024-4 MC9S12HA/HY/P
AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13
AUTH-0027-1 HC(S)908 update Authorized 2016/3/13
AUTH-0027-2 HC(S)908 sercurity Authorized 2016/3/13
AUTH-0028-1 for Renesas V850 Authorized 2017/10/9
AUTH-0028-2 for Renesas SuperH Authorized 2017/10/9
AUTH-0028-3 for Renesas RL78 Authorized ---New
AUTH-0028-4 for Renesas M32C Authorized ---New
XPROG-M V6.12 Adapters included:
ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 for Motorola HC05B/X PLCC52 programming adapter
ADP-0005 for Motorola HC05B/X QFP64 programming adapter
ADP-0006 ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter
Additional adapter for 5M48H P-Flash
ADP-0019 Rev.A EWS3 adapter
EEPROM adapter
QFP28 adapter
QFP64 adapter
QFP80 adapter
QFP112 adapter
QFP144 adapter
X-PROG V6.12 Newly Added 4 Adapters:
ADP-0019 Rev.B ----New
ADP-0006 M35080 ICP adapter ---New
QFP64 MC908AZ/AS60 3K85K adapter ---New
QO18S714 ---New
Package Includes:
1pc x XPROG-Box Hardware (Aluminum Enclosure)
19pc x Adapters Set
1pc x USB Cable
1pc x 16Pin cable
1pc x CD with XPROG-Box Software (V6.12)