Product Description:
Remote control, smart phone management
Timed ration, remote control, one-key snack
Operation status is clear at a glance
A. Reasons why the feeder cannot be connected to the Internet:
1. Check whether the machine is normally powered, if it is normally powered, please see the second step
2. Check whether the network configuration is a 2.4G channel network or a 5G channel network. If it is a 5G channel network, you need to deploy back to the 2.4G channel network, and then press and hold the SET button for 6 seconds. When the green light is on, press APP In the process above, enter the correct account password to link.
3. If the link fails, you can use the mobile hot link. On the page where the APP link fails, click the orange font under Relink to switch to the device hot link method, and before the hot link, please press and hold the RESET button for 2 seconds until the indicator light Change to a blue flashing state, select the device to be linked, and follow the instructions.
B. What is the reason why there is no food falling when feeding on the mobile APP:
1. The smart device turns but no food is detected. It is recommended that you check whether the smart feeding bucket is empty
2. Due to network delay and disconnection, it is recommended to repeat feeding several times to check whether it is normal
3. It is recommended to clean up the grains of the grains in time to avoid excessive accumulation.
C. What should I do if the APP account cannot be logged in
1. First, make sure that the network is normal, and secondly, confirm whether anyone else has logged in to your account, otherwise it is recommended that you uninstall and reinstall the APP and log in again
D. I want to change the APP account I am using, what should I do?
Our APP does not support direct account replacement. Please register a new APP account with a new email address, unbind the smart device under the original account, and then bind it to the newly registered account. The new account binding is: You need to press and hold the RESET button for 6 seconds, wait for the green light to turn on and hear a beep, then link.
Precautions
1. Do not pull the power cord directly when plugging or unplugging the adapter.
2 Please do not put or insert foreign objects into this product, and do not modify this product without authorization.
3. Please use the original adapter and original data cable
4. When the surplus grain indicator is on, the surplus grain of the feeder can only run about 10 grids (5g per grid), please add grain in time
5. This product uses 3 AA batteries (the package does not include batteries). The normal use time is 3-6 months. If the feeder is not used for a long time, please take out the batteries to prevent the electric fluid from flowing out.
6. Only dry dog food can be placed in the granary, please do not place other foreign objects