S500 PCB Frame Kit 500mm PCB Board with Landing Gear F FPV Quadcopter
Features:
2212 920kv Motor
- Type : 22 x 12mm
- KV: 920rpm/V
- Voltage: DC 7-12V
30A ESC Specification
Continuous current: 30A
Burst current: 40A
Lixx battery: 2-4S
Dimension: 18*29*5.5mm
BEC output: 2A 5V
Weight: 8.7g
Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller
Features:
1. The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system;
2. 14 PWM / servo output;
3. Bus interface (UART, I2C, SPI, CAN);
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant power input and failover;
7. Multicolor LED lights;
8. Provide multi-tone buzzer Interface
9. Micro SD recording flight data;
Specifications:
Microprocessor
1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit
2. frequency: 168MHZ, 256K RAM
3.32 STM32F103 backup coprocessor
Sensor
1.L3GD20 3-axis digital gyroscope 16
2.LSM303D 3-axis accelerometer 14 / Magnetometer
3.MPU6000 6-axis accelerometer / magnetometer
4.MS5607 precision barometer
Interface
1 .5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10. External MICRO USB Interface
Package including:
1 set Quadcopter frame kit (as your choice, color be sent at random )
4 pcs 2212 920kv motor (2 pcs CCW, 2pcs CCW,color be sent at random)
4 pcs 30A ESC( version to you at random, according to the stocks)
2 pair 9450 propeller (color be sent at random)
1 set X Pixhawk 2.4.8 32bit ARM Flight Controller
Safety buttonx 1pcs
Buzzer x 1pcs
M8N GPS × 1pcs
GPS holder x 1pcs(color be sent at random)
Landing gear *1 set(color be sent at random)
Xt 60 power *1 pcs