Features:
【6 Channels】:Support SBUS/PWM/PPM for Radiolink AT9/AT9S/AT10/AT10II.
【Fast Response】:All Channels will response within 3ms, fast and stable,quick to set and play.
【Remote Control Distance】:The air control distance reaches 600 meters, and the actual flight distance varies with the environment.
【Resolution】:The industry&x27;s highest resolution of 4096, 0.25us per stage high precision, so that all servos are static.
【Mini Size】:The ultra-small size of 0.98*0.59in and the extremely light weight of 0.01Lb are specially designed for the drone drone, which greatly reduces the weight of the drone and provides stable high-performance control reception for your competition.
How to Match Code With Transmitter:
1. Put the transmitter and the receiver close to each other within 50 centimeters.
2. Turn on the transmitter, then power on the R6DS.
3. There is a black button on the R6DS, press the binding button twice in two seconds and release, receiver light start blinking, after about blinking 8 times, match code success then receiver signal LED always on.
SBUS/PPM and PWM signal change：
Short press the ID SET switch 2 times within 1 second, the signal is changed from normal PWM to SBUS/PPM. The red LED indicates the normal PWM, the blue/purple indicates SBUS/PPM.
SBUS&PPM Output Working Mode:
1.CH1 out PPM signal, CH2 output SBUS signal.
2.CH3 output PWM signal and CH4-CH6, CH8-CH10 independent output PWM signal simultaneously, 10CH totally
R6DS Receiver Specifications:
Channel: PWM:6CH; SBUS&PPM: 10CH
Signal Output:: SBUS/PPM/PWM
Model: racing drone/quadcoptor
Control Distance: more than 600m air
Spread Spectrum: FHSS
Work Current: 38-45mA(5V)
Power Supply: 4.8~6V
RF Power: <10dbm
Precision: 4096
Size: 0.98*0.59*0.4in
Weight: 3.5g
Package Included:
R6DS Receiver x 1
Features:
【10 Channels】:support SBUS/PWM for your racing drone.
【Stable Signal Technology】:DSSS and FHSS dual spread spectrum anti-jamming technology to make the signal more stable, so you can not be interfered by other devices when you are outdoors.
【Super Mini Size】:The ultra-small size of 0.59*0.51in greatly reduces the installation space of the receiver and enhances the aesthetics of the model.
【Built in Gyro】: come with the R6FG gyro integrated receiver is can hold the vehicle in a straight line during aggressive acceleration and braking, the receiver support up to 10v of servo.
【Ultra-long Receiving Distance】:The receiving distance can reach about 600 meters, and the actual control distance is related to the flight environment.
【Receiver Built-in Gyroscope】: Supports Radiolink AT9/AT9S/AT10/AT10II, the best choice for racing drones.
Please note:
1.R6DSM rc receiver suitable for Radiolink’s transmitterAT9/AT9S/AT10/AT10II
R6FG Receiver Specifications:
Features:
【10 Channels】:Support SBUS and PWM signal, while usethe SBUS, it can connect 10 channels.
【Double Signal SpreadSpectrum】:Radiolink R9DS 10 channels using DSSS and FHSS spectrum anti-interference technology, you don’t worry about signal loss.
【Fast Response and Mini Size】: All Channels will response within 3ms, fast and stable. Only 43*24*15mm, just need one cable to connect SBUS, quick to set and play.
【Long Distance Control】:This transmitter receiver can control 900m ground and 1500 air exceptional range. (Actually control range depends on the using environment)
【You Will Get】: an advanced technology receiver and a 12-month warranty from the brand Radiolink and 24-hour friendly customer service.
Please note:
1.RD9S only work with Radiolink transmitter products: AT9S, AT9,AT10,AT10II.
2.Short push the ID set switch two times within 1 second it can change signal, while the LED change to red, it indicates PWM signal output, the blue/purple LED indicates SBUS signal output.
3.SBUS and PWM signal output, you can use 10 channels
SBUS and PWM signal change：
Short press the ID SET switch two times within 1 second, the signal is changed from normal
PWM to SBUS. The red LED indicates the normal PWM and blue/purple LED indicates SBUS signal.
Two signal working mode:
(1)PWM signal output working mode：red LED indicates PWM signal output, 9 channels Totally.
(2) SBUS signal output working mode: blue/purple LED indicates SBUS signal output, 10 channels totally.
SBUS and PWM signal possible working at the same time with SBUS signal output working mode.
CH9 output SBUS signal, the original CH1 output CH3 and original CH2 to CH6 output CH6 to CH10 PWM signal at the same time.
R9DS Receiver Specifications:
Signal: SBUS,PWM
Channel: PWM 9 channels, SBUS 10 channels
Control Distance: 900m on ground,1500m air
Working Voltage: 4.8-10V
Working Current: 38-45mA（input voltage: 5V）
Size: 43*24*15mm
Weight: 11g
Package Included:
Features:
【12CH Dual-antenna Receiver】:Total 12 channels,Support SBUS and PWM signal output,just need one cable to connect SBUS.
【Long Distance Control】: R12DS Receiver can control 1000m ground and 4000 air exceptional range. (Actually control range depends on the using environment)
【Fast Response】All Channels will response within 3ms, fast and stable.
【Telemetry Integrate】:Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01(not included) and module PRM-03(not included) can feedback GPS info, Speed, voltage etc. Suitable for Radiolink AT9/AT9S/AT10/AT10II display when work with flight controller APM or PIX.
【You Will Get】:advanced technology receiver and 12 months warranty and 24 hours friendly customer service.
Please note:
1. R12DS only work with Radiolink transmitter products: AT9S, AT9,AT10,AT10II.
2. Short push the ID set switch two times within 1 second it can change signal, while the LED change to red, it indicates PWM signal output, the blue/purple LED indicates SBUS signal output
Specifications:
Package Included:
Features:
【Powerful Multi-channel Support】:Wonderful 12-channel design to create more operational attitude design for your crossing drone,add more fun to your experience.
【Stable Signal Technology】:Dual antenna DSSS and FHSS dual spread spectrum anti-jamming technology to make the signal more stable, so you can not be interfered by other devices when you are outdoors.
【Super Mini Size】The ultra-small size of 1.18*0.59in greatly reduces the installation space of the receiver and enhances the aesthetics of the model.
【Ultra-long Receiving Distance】:The receiving distance can reach about 1100 meters above ground,4000 meters in the air, but the actual control distance is related to the flight environment.
【Receiver Built-in Gyroscope】:Supports Radiolink AT9, AT9S, AT10, AT10II, the best choice for racing drones
SBUS/PPM and PWM signal change
R12DSM Receiver Specifications:
Package Included:
Features:
【8 Channels】: Blue/Purple LED indicates SBUS&PPM signal output, 8 channels totally, support SBUS&PPM&PWM output at the same time.
【Fast Response】: 2.4G receiver all channels will response within 3ms, fast and stable. Only for the T8FB of Radiolink&x27;s transmitter, is the best choice for racing drone.
【Long Distance Control】:Long RX antenna and great FHSS spread spectrum tecnology make the R8EF get strong anti-reference ability. Stable control distance is about 500m ground and 1000m air (Actually control range depends on the using environment).
【Applicable Remote Control Transmitter】: Only for Radiolink T8FB.
【You Will Get】:advanced technology receiver and 12 months warranty and 24 hours friendly customer service.
Please note:
1.R8EF 8CH receiver only work with Radiolink transmitter products:T8FB.
S-BUS and PPM signal change:
1.Quick press the ID SET switch 2 times within 1 second, the signal is changed from PWM to S-BUS&PPM.
2.Red LED indicates PWM signal output with 8 channels totally work, blue/purple LED indicates SBUS&PPM signal output, 8 channels totally work.
3.SBUS and PWM signal possible working at the same time with SBUS&PPM signal output working mode. CH1 output S-BUS signal, CH2 output PPM signal, CH3 to CH8 output PWM signal at the same time.
Specifications:
Channels: 8 channels
Working voltage: 4.8-10V
Working current: 30mA（input voltage: 5V）
Size: 48.5*21*11mm/1.9*0.8*0.4in
Weight: 7g/0.015lb
2048 section precision, 0.5us per section, servo anti-shake rudder.
Control distance: about 500m ground and 1000m air, actually control distance depends on the environment.
Package Included:
R8EF receiver x 1
Radiolink R8FM, 2.4G 8 channels receiver, 2.5 gram weight, S-BUS and PPM signal support, use for Radiolink transmitter T8FB, is the best choice for racing drone.
Two signal working mode:
Blue/purple LED, S-BUS signal , 8 channels totally.
Red LED always, PPM signal, 8 channels totally.
S-BUS and PPM signal change:
Quick press the ID SET switch two times within 1 second, the signal is changed from S-BUS to PPM.
The red LED indicates the PPM and blue/purple indicates S-BUS.
How to match code with transmitter:
1. Put the transmitter and the receiver close to each other within 1 meters.
2. Turn on the transmitter, then power on the R8FM.
3. Connect CH3 of R8FM to ESC.
4.There isa black button on the R8FM, pressthe binding button twice in two seconds and release, receiver light start blinking, after about blinking 8 times, match code success then receiver signal LED always on
Specification:
1) Channels: 8 channels
2) Working voltage: 4.8-6V
3) Working current: 30mA(input voltage: 5V)
4) Size: 16.0*21.5*1.0MM
5) Weight: 2.5g
6) 2048 section precision, 0.5us per section, servo anti-shake rudder.
7) Control distance: about 300m ground and 600m air, actually control distance depends on the environment.
Installment of receiver antenna:
1. The antenna must be kept as straight as possible. Otherwise it will reduce the effective range.
2. Large model aircraft may of some metal part interfering signal; in this case the antennas should be placedat both sides of the model. Then the best RF signal condition is obtained at any flying attitude.
3. The antennas must be kept away from conductive materials, such as metal and carbon by at leasta halfinch.The coaxialpartofthe antennas doesnotneedtofollowtheseguidelines,butdo not bend it in a small radius.
4. Keep the antennas away from the motor, ESC, and other noise sources as much as possible.
5. Press and hold the Easy Link (ID SET) one second, now the receiver starts work.
6. After all of the above steps finished, the LED indicator will turn and keep in red.
7. The receiver can be packed by sponge or foam for shocking proof when it is installed to the model.
After all of the above steps finished, turn off the transmitter and then power it on, now the program functions to assure it under control of transmitter with a right connection
Radiolink Data Return Module PRM-01 for AT09 AT10 Transmitter Remote Control RC PartsOriginal RadioLink OSD Information Telemetry Module PRM-03 for Radiolink AT9 AT9S AT10 AT10II Transmitter
Features:
100% brand new and high quality
Radiolink PRM-01 Power Return Module for Radio Remote Control System AT9 AT10 TX
Radiolink data transmission module, applies only to AT9 AT10 with R9D Le Di R10D receiver.
The flight data is displayed on the remote screen.
Function:
Related information includes: signal strength, receiver voltage, battery voltage, temperature, engine speed, GPS location
Specifications:
Module Dimension: (L*W*H): 37*26*13mm
Package size: 100*150*13mm
Module Color: Gray
Net Weight: 11g
Package Weight: 13g
Package Includes:
1x PRM-01 Module
1x Data cable
Note:
This data backhaul module applies only to Radiolink Melody AT9 & AT10 Universal Remote Control.
OSD telemetry module transmits the data from the flight controller and displays the data of SPEED, RISE, THRO, VOLT, LATI, LANGE, ALT, GPS, RSSI, MODE, YAW, ROLL, PITC, DIST in the display screen of AT9, AT9S , AT10 or AT10II.
1. Introduction:
(1). Size: 27 * 13mm
(2). Weight: 6g (including the wires)
(3). So far, OSD information telemetry module PRM-03 is compatible with flight controller PIX and APM.
(4). Support RadioLink receiver R9D, R9DS, R10D, R10DII, R10DS and R12DS.
(5). PRM-03 can telemetry speed, climb, throttle, tension, length, latitude, altitude, GPS, RSSI, flight mode, yaw, ROLL, PITC, distance.
(6). PRM-03 is compatible with 1 cell to 12 cell battery (3.7 ~ 50.4V).
Pay attention: the old version AT9 and AT10 have to update the firmware, if if use PRM-03 to telemetry OSD information. Upgrade AT9 firmware to V1.2.6 (OSD) or upgrade AT10 firmware to V1.0.6 (OSD).
2. Connection:
(1) Connect one end of the telemetry module PRM-03 to R9D / R9DS / R10D / R10DII / R10DS / R12DS and the other end to battery if you only need to feedback battery voltage. Same function as RadioLink PRM-01 if you connect like that.
(2) If you want feedback speed, climb, throttle, voltage, length, latitude, altitude, GPS, RSSI, flight mode, yaw, ROLL, PITC, distance information, Please enclose the end of the OSD information telemetry module PRM-03 to R9D / R9DS / R10D / R10DII / R10DS / R12DS and the other end to the TELEM port of PIX or APM.
