iCharger DX6 DC 900W 32A Dual Channel High Power Balance Charger Discharger for LiPo Lilo LiFe LiVH LTO NiZn NiMH NiCd Pb Batter
Specifications
Input voltage range: 9-34VDC
Maximum input current limit: 65A(Channel 45A)
Maximum charge/discharge current: 50A(Channel 32Ax2)
Maximum charge power capacity: 1500W(Channel 900Wx2)
Maximum discharge power capacity: 60W(Channel 40Wx2)
Maximum regenerative discharge power capacity: 1500W(Channel 900Wx2)
Maximum extra discharge power capacity: 1600W (Channel 900W @30V/32A)
Maximum current drain for balancing: 4A(Channel 2Ax2)
Type-C PD port: 5V/3A,9V/2A,12V/1.5A
Support Battery type: LiPo, Lilo, LiFe, LiVH, LTO, NiZn, NiMH, NiCd, Pb
Net weight: 360g
Dimension: 92×112×40mm
Safety Notes
Please read the entire Manual completely before using, to make sure you can use this device properly and more safely.
DX6 is a dual port charger, but this does not mean you can charge/discharge any configuration
of the two sets of batteries You must follow these rules: two battery packs without any external
electrical connections, otherwise they could permanently damage the charger or batteries. For
example: when charging a 12-cell battery pack, you must split it into two separate 6-cell, and
you must never charge two 6-cell battery packs in series by connecting with CH-1 and CH-2
respectively.
DX6 input power cannot have fast voltage/current fluctuations, which may cause output over
current, and will damage the charger and/or the batteries and input power source in extreme
cases. For example: setting the input protection current and voltage is necessary according to
the specifications of the input power supply, in order not to cause power overload. Some power
supply overload protection circuits will produce substantial fluctuations in the supply voltage. 1 Keep the charger away from children and pets at all times.
2 Never leave the charger unsupervised when charging or discharging. If you leave, disconnect the battery and switch off
charger to prevent any unexpected dangers or damage.
3 Ensure the charger program and settings match the battery pack otherwise the battery will be damaged and a dangerous
situation may arise, especially for Lithium batteries, which may cause a fire.
4 Do not mix batteries of different types, different capacities or from different manufacturers.
5 Do not disassemble the charger.
6 Do not place the charger or any battery on a flammable surface or near a combustible material while in use. Do not
charge or discharge on a carpet, cluttered workbench, paper, plastic, vinyl, leather or wood, inside an R/C model or
inside a full-sized automobile.
7 Never block the air intake holes and never use in a refrigerated or high temperature environment. If used in such an
environment, the internal temperature protection may result in abnormal charging/discharging that could be dangerous.
8 Do not allow water, moisture, metal wires or other conductive material into the charger.
9 Never charge or discharge any battery having evidence of leaking, expansion/swelling, damaged outer cover or case,
color-change or distortion.
10 Do not try to charge “non-rechargeable” dry cells.
11 Do not exceed the battery manufacturer’s suggested maximum charge rates.
12 Carefully follow the battery pack manufacturer’s recommendations and safety advice.
13 The DX6 uses advanced Synchronous buck-boost DC/DC converter technology, high power, a high current and
high-performance power conversion circuit. The maximum charge power capacity is up to 1500W, the maximum
charge/discharge current of a channel is up to 32A, and two channels in Synchronous Mode are up to 50A.
14 Each channel supports 6s LiPo, Lilo, LiFe, LiHV, LTO and NiZn batteries, with maximum 2A balance current, and
adopts a unique balance calculation of internal resistance correction. Supports 1-15s NiMH/NiCd batteries and 1-12s
Pb batteries.
15 With digital-power mode for great protection (over-current protection, over-voltage protection, input under-voltage
protection, input undercurrent protection, and etc.)
16 With type-c PD charging port, convenient for the user to charge mobile phones and PCs.
17 Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan
speed.
18 Internal temperature protection. When the internal temperature exceeds the Power Reduce temperature, the output
power is automatically reduced; and the charger will shut down when temperature exceeds the Shut-down temperature.
19 This charger can save 64 parameters sets and support the data import/export to SD card.
20 A 2.4" IPS LCD screen provides rich information including current, voltage, power, capacity, internal resistance,
control status, time-consuming and temperature, etc.
21 Multi-discharge features: self-discharge, regenerative to input or discharge to another channel, and lithium battery extra
expanding discharge.
22 Supports measurement for internal resistance of battery offline and online. Measure not only the internal resistance of
the entire battery pack, but also measure the internal resistance of each cell within the lithium battery.
23 DX6 has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity,
overrun time and maximum power etc.
24 Supports upgrading the hardware program by USB port or SD card. DX6 also supports the “Junsi Console” software
and can display, plot and analyze the charge and discharge data by it.