.
Connection Guidance of Audi 20-Pin Block Adapter Cable
A separate 20-pin Block Adapter Cable (referred as Adapter Cable below) is designed for Audi car stereos (mini ISO 8 pin), the Adapter Cable works together with mini ISO 8-pin cable, and needs to be connected as follows:
1. Release BLUE connector from the Adapter Cable;
2. Insert the released BLUE connector into the Device’s BLACK female port (B);
3. Combine the Device’s BLUE connector (A) with the Adapter Cable’s YELLOW & GREEN connector, in place of the released BLUE connector, thus form a new combined 20-pin connector;
4. Connect the new combined 20-pin connector to Audi stereo’s CD changer port;
5. Connect the Audi original BLACK 20-pin block connector to the Adapter Cable’s RED 20-pin female port. Connection is completed.
***The Device refers to Digital Music Changer (USB/SD/AUX MP3 Adapter) or iPod Car Adapter.
VAG mini ISO 8-Pin Cable:
Key Features:
• Plug&play, modular design,CDC alternative
• Connected with wire harness, not FM signal controlled ,Hi-Fi guanranteed
• Controlled by vehicle Head Unit,support Steering wheel operation
• With Hi-Fi Decoding Chip,perfectly support MP3 and WMA tracks
• Supports SD/SDHC/MMC card/U Disk/Card Reader/Hard Disk
• Supports external audio source(MP4 PSP Mobile Phone) via AUX in port
• Playlist function same as multi CDs
• Supports Last Position Memory(LPM)
• Vibration and interference proof
• Easy to install,no damage to original car decoration
• Different module firmware versions for different types of protocol of car stereos
• With BT slot for additional Bluetooth hands-free kit(Opitional).
Specification:
• Voltage input:12v DC
• Signal-to-noise:95DB
• Max.Current:600MA
• Max. voltage output:12v
• D/A Device :24BIT 192KHZ
• Total Harmonic Distortion:0.01%
• Frequency Response:20HZ-20KHZ
• Working Temperature:-10C-80C
• Module case in made of aluminium alloy
• Module unit: 94 x 66 x 16mm
• Packing box: 132 x 50 x 215mm
• Net weight: 80g;
• Gross weight:300g;
• 50units/big carton
Operation is simple
• Transfer your MP3 / WMA to USB stick / disk / SD/MMC card / drive
• Connect this Car Digital Music Changer to your car stereo via CD changer port
• Plug-in USB disk / stick / SD/MMC card / drive into your Car Digital Music Changer
Compatible with Storage Devices
• Most USB disk / flash drive / stick / mass storage devices / external harddrive
• SD/SDHC/ MMC Card /Card reader
• Any MP3/MP4/PSP/GPS/Mobile Phone/DVD player via AUX Port
Includes:
Installation guidance:
1, Plugs in to the back of the Car Stereo. It uses CD changer port of your stereo.
2, Plug-and-play operation.
3, Works as an AUX Input converter for any MP3 player.
To remove your existing car radio, You may be able to find more information via websites or by contacting a dealer/qualified installer.
Specification:
l Voltage Input : 12V DC
l Signal-to-Noise : 95DB
l Max. Current : 600MA
l Max. Voltage output : 12V
l D/A Device : 24BIT 192KHZ
l Total Harmonic Distortion : 0.01%
l Frequency Response : 20HZ-20KHZ
l Working Temperature : -10C- 80C
YT-M06 Including parts with 1pc YT-AUDI20 20pin Cable:
Package: