Included
1 Set GK21S Hotswap Bluetooth Numpad.
-----Base Kit :
Plastic Case + USB Type C Hotswap PCB + Cable + White Steel Plate + Stabilizers + Feet + Switch Removal Tool + 750mAh volume Battery.
( No Switch And keycap )
Attention
When plugging switches,please put the switch 90 degree above the PCB.When there is some resistance,don't plug it in forcely and check whether your switch pin is bent.
Details
1.This pcb is fully programmable.
2.The plastic case is made amoulding machine.
3.The chipset is MCU 32 bit,3 pcs 256*256*256 RGB drive to support full 16.8 million RGB.
4.PCB has RGB presoldered,it's under per switch.
5.PCB RGB can support by music.
6.Bluetooth option is bluetooth 5.1,uses broadcom bluetooth chip.You can long press Fn+7 8 9 to connect bluetooth with your device.
7.Bluetooth stand by time is around 10 days,if you use it without led,it can last around 6-8 days,if you use it with leds,it last around 2- 4 days.
The battery will charge in auto when you insert USB to PC or charger when the capacity is under 90%.
8.There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.
Just put in switches in is ok,no need soldering again.3 pin 5 pin both are supported.
-----PCB is programmable with the software below (Can download on official website)
drive.google.com/file/d/1lgeUk68kshxosrK2gBDbTUyJMCNrcu23/view?usp=sharing
Switch Click Here
Keycap Click Here