Features:
• OLED module (support the same driver chip SSD1322 Screen, 3.1 inches or 5.5 inches), resolution 256X64.
• Support 32HZ-16KHZ sweep frequency, to ensure the Accuracy of each band
• the falling speed of the light bar, the holding time and The falling speed of the peak
• Real output and smooth output selection.
• Spectrum brightness can be adjusted 15 levels.
• Software AGC + custom output curve, In order to ensure that the input signal in a large range of output effect
Is ideal
• Custom frequency band display to ensure that even the 21 bands, can fully display the audio frequency range.
• can support display the current volume value (digital percentage display or ruler display)
Specific operation:
Normal mode:
1. Single click
OK - Show the ruler on the left side or no
UP - Mode change
DOWN - Mode change
2. Double-click
OK - Switching between real / smooth1 / smooth2 output
3. Three-click
OK - Bottom display or no
4. Four -click
OK - Open volume display or no
5. Five -click
OK - Under the premise of opening the volume
Display function, you can switch the digital percentage volume display or ruler.
6. Composite key
UP + DOWN + OK -2 Seconds, Enter the screen self-test
Program, press the OK button 2 seconds to exit.
7. Long press button
UP - Brightness increase.
DOWN - Brightness reduction.
Speed ??setting mode: (In normal mode, press the button for 2
Seconds to enter, press the button for 2 seconds to exit).
OK -
A. The falling speed of the light bar (15 optional)
B. The holding time of the peak (15 optional)
C. The falling speed of the peak (15 optional)
D. Output selection (Real output / smooth1 / smooth2
Output)
Loop in these functions.
UP - Time increases,
DOWN - Time decreases, Speed ??increase.
Other function operation:
Factory default
OK -10 Seconds.