Meanwell Power Supply SE-600-24 SE60024 600W 24V 25A Original New
Product Description
Features :
Universal AC input/Full range
Protections:Short circuit/Over load/Over voltage
Cooling by free air convection
100% full load burn-in test
LED indicator for power on
2 years warranty
MODEL | SE-600-24 |
OUTPUT | DCVOLTAGE | 24V |
RATEDCURRENT | 25A |
CURRENTRANGE | 0~25A |
RATEDPOWER | 600W |
RIPPLE&NOISENOTE.2 | 150MVP-P |
VOLTAGEADJ.RANGE | 22~26.4V |
VOLTAGETOLERANCENOTE.3 | ±1.0% |
LINEREGULATION | ±0.5% |
LOADREGULATION | ±0.5% |
SETUP.RISEHOLD.TIME | 1000ms,50ms /230VAC 1000ms,50ms/115VACat full load |
HOLD TIME(TYP.) | 20ms/230vac 16ms/115vac at full load |
INPUT | VOLTAGERANGE | 90~132VAC/ 180-264VAC selected by junper or switch 248~370VDC |
FREQUENCYRANGE | 47~63HZ |
EFFICIENCY | 87%/115vac |
AC CURRENT | 12a/115vac 7.5a/230vac |
INRUSH CURRENT | 25a/115ac 50a/230vac |
LEAKAGECURRENT | <2.0mA/240VAC |
PROTECTION | OVERLOAD | 105~125%rated output power |
Protection typeHiccup mode,recovers automatically after fault condition is removed |
OVER VOLTAGE | 27.6~32.4V |
Protection typeShut odown o/p voltage,re-power on to recover |
FAN CONTRAL O.P.T, | RTH1 65 FAN ON, 55 FAN OFF, 70 (5 ~ 15V) RTH1 70 FAN ON, 65 FAN OFF, 80 (24 ~ 48V) |
ENVIRONMENT | WORKING TEMP | -20~+60 (refer to output load derating curve) |
WORKINGHUMIDITY | 20~90% RH non-condensing |
STORAGE TEMP HUMIDITY | -40~+85 10~95%RH |
TEMPCOEFFICIENT | 0.05%(0~50) |
VIBRATION | 10~500HZ,2G10min/1cycle period for 60 min each alongX,Y,Zaxes |
SAFETY&EMC | SAFETY STANDARDS | UL60950-1 approved |
WITHSTAND VOLTAGE | 1/P-0/P:3KVAC 1/P-FG:1.5KVAC 0/P-FG:0.5KVAC |
ISOLATIONRESISTANCE | 1/P-0/P,1/P-FG,0/P-FG:100M Ohms/500VDC |
EMI CONDUCTICN& RADIATION | Compliance to EN55022(CISPR22)classB |
HARMONICCURRENT | Compliance to EN61000-3-2,-3 |
EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11 ENV50204,EN50204,EN61000-6-1 Light industry level criteriaA |
QTHERS | MTBF | 197Khrs min MIL-HDBK-217F(25) |
DIMENSION | 247*127*63.5mm(L*W*H) |
PACKING | 2.1Kg 6pcs / 13.4Kg / 0.98CUFT |
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |