1PC 10V-32V 12V 24V 480A/960A Brush ESC bidirectional 3S-6S Speed Control For RC Rock Crawler Boats Tank No Brake
HC480A Type 2: 480A without connector, no brake model
HC960A Type 1: 960A without connector, climbing car model
HC960A Type 2: 960A without connector, no brake model
HC960 Type 3: 960A XT60 connector, climbing car model
Specification:
- UBEC: 5V 2A (Power supply to the receiver and servo)
- Weight: 65-70g
- Signal interface: around 20cm long wire
- Control switch: around 20cm long wire
- Power interface: XT60, or without interface
- Motor interface: XT60, or without interface
- Size: 5CM*3.5CM*2.9CM
HC480A:
- Working voltage: 10V-32V (Lipo 4-7S), support 24V storage battery
- Continuous/peak current: 50A/480A forward, 50A/480A back
- Wire: power line and motor line 14AWG-100mm
- Supported motors: 24V less than 12000rpm 540/550775/795 brush motor, only used by motor within 12000rpm, connect with only one motor.(Note: It is the motor&x27;s own speed, not the speed after the gearbox. )
HC960A:
- Working voltage: 10V-32V (Lipo 4-6S), support 24V storage battery
- Continuous/peak current: 100A/960A forward, 100A/960A back
- Wire: power line and motor line 12AWG-100mm
- Supported motors: brush motors, like 540/550/775/795/D848. For the motor under 10000, it can only connect 2 motors. (Note: It is the speed of the motor itself, not the speed after the gearbox)
E.G. When the motor rotate 10000 at 16V, it can conncet 2 motors when with 16V. It can NOT connect the battery above 16V)
Description:
- Support model tanks, crawlers, boats. 2 ESCs are needed
- Crawler mode: Automatically stop the motor after the throttle is back. (When the motor rotates forward, the throttle will pull back and the motor will immediately reverse)
- No brake mode: After the throttle is back, the motor can rotate by inertia. (When the motor rotates forward, the throttle will pull back and the motor will immediately reverse)
Package included:
1pc x ESC