1Set 4-Channel 4CH Remote Control Kit High Power 2.4Ghz Receiver Module+Transmitter Board+ Battery Case for RC Model Boat/Cars
Specification:
- Launch Plate: 2.2V -4.5V,(2-3 batteries, 1.2V lithium battery or 1.5V dry battery)
- Receiving board: 3.6V-10V (3-6 1.5V dry batteries, or 3-8 1.2V lithium batteries)
- Distance: 100m
- Frequency: high-frequency 2.4G, need bind, signal stability when use several sets together
- Power: high-power, integrated motor driver chip on the receiving board, MOS tube drive efficiency is high, saving power. max. 2A/channel
- Remote Controller Frequency: high-frequency 2.4G, automatic bind after power on, signal stability when use several sets together
- Suit for differential engineering toy car, excavators, tanks and remote control boats. suitable for the differential turning of the motor on the left and right sides: such as the left and right side of the track, such as the tank excavator, the crawler robot, and the remote control boat with two propellers left and right, the high-power long-distance toys.
To the frequency (pair code) method: press the back and right buttons of the remote control at the same time, and then power on again (note: must press the two buttons and then power on), at this time the transmitter board indicator Flashing, enter the frequency mode (if it has not received the power on the board for 15 seconds, it will automatically exit), and then the receiver board, then you will see the receiver board and the remote control light flash 3 times, indicating pairing carry out. (If multiple sets of transceivers are simultaneously matched, remember that you can only set one set at a time, and all others must be powered off)
Note: If the frequency is successful, the next time you use it, you don&39;t need to use the frequency again. If the transmitting board or the receiving board is lost, you can use it again. A remote control can be paired with multiple receivers to control multiple receivers.
Using:
The function of each button is as follows: (One button will turn the two motors together to realize the differential turn automatically)
- The top button on the left side of the launch pad: When pressed, the two motors will rotate forward.
- Press button on the left side of the launch pad: Both motors will reverse when pressed
- The right side of the launch pad is turned to the left: one motor rotates forward when pressed, and the other motor is reversed (tank boat makes a differential turn without a servo)
- The right side of the launch pad is pressed to the right: one motor is reversed when pressed. The other motor is forward (the tank is turning sharply. No steering gear is required)
- You can also move forward or backward while achieving a left and right turn
Note:
1. Not suitable for ordinary toy cars
2. this product suitable for low power 130 180 brushed motor,do not fit for high power 380 motor(many 380 motor with more than 2A current, this will burn receiver board)
3. the receiver power supply needs to distinguish between the positive and negative poles, and the reverse will cause burnout. Red positive / black negative
Package:
1Set x receiver + transmitter kit