new scheme and 100% of the pressure on a circuit board and testing components.
(With a precise DC charging characteristics, charging the results are satisfactory, the battery will not be overloaded)
the main parameters of the product:
1. Input voltage: 100-240 V // 50/60 Hz,
2. Output voltage: DC8.4V
3. Output Current: one thousand ma
4. Plug: US Rules (plug-in can be configured)
Line 5 and 1 m long wire, DC head: 5.5 x 2.1 Fork
6. Packing: OPPE individually wrapped bags
7. The weight of 65 g / 1.
and the region
1. Lithium batteries (lithium-ion batteries, lithium polymer battery, the battery voltage is 7.2 to 8.4-power range
1100 ~ 5500 mAh. 18650.18490, 14650.14500, 14430, and other batteries
and lighting functions:
1. When the device when the light is green,
2. When the battery is in the red
3. When the battery is fully independent green
and protection functions:
1. Input over-current protection
when the input current ratio of 0.1 1A charger, but will cut the fuse, overcurrent protection network begins
impact charger ,, to avoid fire and other risks referred to internal barriers.
2. The output current protection
Li-ion battery charger current limited range of safe position. when the lithium battery is completely empty, filled
repair it automatically goes to the state, insurance companies batteries, increasing battery life.
3. Short-circuit protection
when the charger with the device, the positive and negative output is connected to the charger output current is 200mA or less will be enough to protect the charger
positive and negative output short circuit will not be damaged.