Update Leadshine DCS810 Brushed DC Servo Drive 80VDC Peak single-ended
Features:
1.The DCS810 is a digital DC servo driver developed with DSP and high efficient MOSFET technologies. In position control, it&39;s easy for the end users to change stepping drivers to the DCS810 without changing control systems, because its input command is PUL/DIR signal, which is compatible with that of stepping drivers. In low power motion control applications, performances of DC servo systems using the DCS810 are better than those of digital AC servo systems in velocity, precision, noise, stability, or at least as good as those of digital AC servo systems. However, the cost of the DCS810 stays at the price line of stepping driver, namely far lower than those of AC servo drivers.
2.Compared to the DCS810S, the DCS810 can accept differential control signals and differential encoder feedback signals, offering better anti-interference performances. Compared to the DB810A, parameter visible tuning tools make the DCS810 much easier to tune.
3.The DCS810 is very easy to tune and all parameters are visible. Parameter visible tuning tools, including Pro Tuner (Windows based setup software) and STU (Small servo tuning unit) can meet different tuning environments or requirements.
Description:
1 electrical characteristics
Parameter DCS810
Minimum value unit
Continuous output current 0 - 10 A
Input supply voltage +18 - +80 VDC
Logic input current 7 10 20 mA
Pulse frequency 0 - 500 kHz
Insulation resistance 500 MΩ
Encoder current 50 mA
2 use environment and parameters
Cooling mode natural cooling or heat sink
Use environment to avoid dust, oil mist and corrosive gas
The temperature of 0 DEG C - 50
Humidity 40-90%RH
Vibration 5.9 m/s2 Max
Storage temperature -20 +80 C
Weight of about 210 grams
Shipment quantity: 1pcs