High Voltage Automatic Charging Of Capacitor Charger Micro Electromagnetic Gun
Function: voltage conversion
Model: DWY-8
Length width height: 5.2* 1.5 * 2 cm
Input voltage: straight current 3.2 --- 6V
High voltage output: setting auto (250v--480v) values.
Suitable for small and micro electromagnetic gun power supply system or power system integration in electromagnetic gun, intelligent storage,
VCC (3.2-6v) DC battery cathode;
GND 3.2-6v) DC battery pack negative.
C+ high voltage capacitor cathode;
C- high voltage capacitor.
According to the setting voltage, automatically stop, according to the use of different parameters automatically refresh the opening and stopping frequency, automatic constant pressure regulator, guarantee the use of conditional stability of the parameters.
Set the voltage as shown in Figure:
Counter clockwise adjustment knob, the output voltage increased; clockwise adjustment knob, the output voltage reduces. Here to adjust the knob to gently slow, after the observation of the voltage rotation. In addition, the buck adjustment is not a time adjustment in place, because the capacitor voltage maintained at the high voltage, not immediately dropped. Output voltage generally around 420v. If you need to lower than the 420v voltage, adjust the number of appropriate clockwise to set a few laps, and then boost the power to adjust to the required voltage. The capacitor is different, automatically stop the voltage after the setting of a slight difference.
Suitable for micro electromagnetic guns, or single stage guns, but also a multi-stage gun per level. Depending on the specific use condition, touch the chip is not hot.