Powerful Functions of ThinkScan TS601:
1.Support 3 System Diagnostic:
This car obd2 scanner is capable of reading and clearing trouble codes of Engine, Airbag/SRS, ABS.
2.Engine system Diagnostic:
You can diagnose the engine system via ecu obd2 port, support all 10 OBDII test modes, such as live data, O2 sensor test, component test and more;read and clear the engine error codes, find out the exactly problem, repair it, and turn off the MIL engine light.
3.ABS system Diagnostic:
Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this scanner does for you.
4.SRS system Diagnostic:
safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.
Support 4 reset service Functions :
1. EPB Electronic Parking Brake Service Reset:
Allows you to perform the service and maintenance of brake systems, including deactivation and activation of the brake control system, bleeding brake fluid, openingand closing brake pads, and setting brakes after disc or pad replacement.
2. Oil Light Service Reset:
Oil Light Reset menu allows you to reset the service lamps on the instrument cluster.
3.SAS Reset Steering Angle Sensor Calibration
let you perform calibration of the Steering Angle Sensor.
4.TPMS, Tire Pressure Monitoring System Programming
allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS programming and reset after tires and/or TPM sensors are replaced and/or tires are rotated.
Support Full OBD II Functions :
-
Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
-
Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
-
Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
-
I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
-
Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
-
View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
-
O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
-
On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
-
Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
-
Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
Specification:
Display: 3.5"LCD with good visual effect
Operating Temperature: 0 to 60 (32 to 140)
Storage Temperature: -20 to 70 (-4 to 158)
Power: 8 to 18 V provided via vehicle
Supported Protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898
Weight: 0.8Kg
ThinkScan 600 Car list:
For AUDI, For BENZ, For BMW, For CHRYSLER, For CITROEN, For DACIA, For DAEWOO, For FIAT, For GM, For HOLDEN, For HONDA, For HYUNDAI, For JAGUAR, For JPISUZU, For KIA, For LANDROVER, For MAHINDRA, For MARUTI, For MAZDA, For MINI, For MITSUBISHI, For NISSAN, For OPEL, For PEUGEOT, For PORSCHE, For RENAULT, For SAAB, For SEAT, For SKODA, For SMART, For SPRINTER, For SUBARU, For SUZUKI, For TATA, For TOYOTA, For USAFORD, For VOLVO, For VW
Notice: For functional car models, please contact seller, thank you.
ThinkScan 601 Packing list:
Thinkscan 601*1
OBD2 cable*1
Card reader*1
Manual book*1
ThinkScan 601 Register & Update Guide:
1. Go to http://www.mythinkcar.com to download the update tool and install it on the computer.
2. System requirements: Windows XP, 7, 8 or Windows 10.
1. Note down the Serial Number and Register code.
1).Connect one end of the USB cable to your tool, and the other end on the computer.
2).After the tool has powered up and entered the main menu screen, move the highlight bar on the "Help" icon and press [OK].
3). Highlight the "Tool Information" in Fig. 1 and press [OK].
4). Write down the Serial Number and Register code for later use.
1).Launch the update tool, a screen similar to Fig. 3 will appear
*Note: Once the S/N is entered, “Restore System” becomes activated, which is used to restore system if a new memory card is replaced.
2).Select the target language and enter the Product Serial Number, click [Device Upgrade], a screen similar to Fig. 4 will appear.
3).Enter the required E-mail address and Register Code, click [Submit] to finish the sign-up.
*Note: For initial use, user needs to go through a registration process. Once you finished it, the registration screen will not appear again each time you click the [Device Upgrade] button in the future.
1).Install the memory card from the tool into the supplied memory card adaptor and insert into the USB port of the computer.
2).Reopen the update tool, select the updates you would like to performor click "Select All", and then click [Download] to start downloading the update package into the memory card.
1).Once all steps are complete, find the mem
2). Connect the tool to the computer via USB cable.
3).The tool starts verifying the consistence of the local files with the files in the memory card. If difference exists, the tool will automatically start updating and a green update progress bar will appear on the bottom of the screen. Be patient to wait until the update is completely finished.
*Statement: All information and illustrations in this Quick Start Guide are based on the latest information available at the time of printing. Due to continuing improvements, actual product may slightly differ from the product described herein, and this
Quick Start Guide is subject to change without prior written notice.