The set includes E30 +L30+Fanmusic C003 RCA cable
Newest version 2004+ with non-reversal polarity
E30 DAC Spec:
PCM
USB :44.1kHz-768kHz 16bit-32bit
OPT/COAX : 44.1kHz-192kHz 16bit- 24bit
DSD (Native)
USB :DSD64-DSD512
OPT/COAX :Not supported
DSD (DoP)
USB : DSD64-DSD256
OPT/COAX :Not supported
Output Voltage:2Vrms@0dBFS
THD+N:<0.0003% @1kHz A-weighting
Noise:<2uVrms @A-weighting
Crosstalk:-130dB @1 kHz
SNR:>121dB @ 1kHz
Dynamic Range:119dB @1kHz
Channel Balance:<0.3 dB
E30 DAC Features:
1. AK4493 DAC chip
AK4493 is a new generation of premium model AK4490 from AKM.
-11 3dB :Distortion
1 26dB* :Dynamic range
DSD :Support DSD512
PCM :Support 768k
* This data is based on the MONO mode of chip, not equal to specs of E30.
2.Support DSD512 and PCM32bit/768kHz
E30 uses 2nd generation XMOS XU208, USB supports up to PCM32bit768kHz and DSD512, which is far
more than CD and SACD. We also customize the driver (for Win7 and above) from Thesycon to get a better performance with your computer.
3.CS8416 receiver
4.Commonly used inputs
E30 supports USB, optical and coaxial inputs which cover a variety of commonly used occasions, such as computer, mobile phone OTG,digital turntable and media player, TV and set-top box.
5.5V power supply, anytime and anywhere
Using 5V power supply, E30 can easily access the working power supply anytime and anywhere in nowadays. You can power the E30 by USB port of computer, mobile phone charger or portable charger. When using portable charger, E30 turns into a portable DAC and bring the Hi-Res music around.
6.DAC filter mode
E30 is capable of providing 6 filter modes under PCM decoding,2 filter modes under DSD decoding, which slightly adjust the details. (Note: it is not the same as EQ function.)
7.Auto turn on/off
E30 has the function of auto turn on and off. It will automatically enter into stand by when the input signal is lost or unavailable in 1 minute. Once detecting any signal of inputs, it will turn on and switch to this input.
8.DAC + Pre-amp application
E30 has built-in volume control function that can adjust the volume from -99dB to 0dB by using the remote control, so you are able to directly connect E30 to power amplifier or active speakers, and control the volume of E30 through remote control.
9. Pure DAC apptication
E30 is able to fix to maximum output level so that it can be worked as a pure DAC. In this mode, DSD signal will bypass the DATT Soft Mute and 02 Modu-lator to provide you a pure/direct DSD performance.
L30 Headphone Amplifier Description:
The
TOPPING L30 is a new product with Ultra-High Performance NFCA
modules,uses the same NFCA (Nested Feedback Composite Amplifier)module
from flagship A90. Voltage Current hybrid feedback architecture along
with UHGF (Ultra High Gain Feedback) technology provides excellent DC
and AC performance. High output current drive capability allows the amp
driving low impedance headphones with ease. Ultra-low noise of 0.3uV is
miles ahead of the competition,giving an absurdly high dynamic range of
141dB and no audible noise and darkest background for the most sensitive
IEMs.
3
step gain settings: L30 is equipped with three gain settings of
-9.9dB/0dB/9.5dB.Wide range of gain settings and the 0.3uVrms ultra-low
noise makes L30 easily adapt to all types of headphones from extremely
sensitive IEMs to most power demanding full-sized over-ears.
Also
an excellent preamp:The NFCA modules of L30 are not only able to drive
the headphones but also apply to be a preamplifier with the same
ultra-high performance. When it is in preamp mode,output impedance is as
low as 20ohm, which is widely suitable for various devices.
L30 Headphone Amplifier Contents list:
L30*1
AC adapter*1
6.35mm to 3.5mm adaptor*1
User manual*1
Warranty card*1