start
Meikon 67mm M67 Full Color Red Filter underwater D... 4 x 8 Meikon 67mm Filter Ring Mount Adapter Clamp For ma... Underwater Tray Housings Arm for Gopro Action Came... Underwater Tray Housings Arm for Gopro Action Came... 67mm to 67mm Flip adapter for Underwater housings ... Underwater 2.3 Meikon Underwater Photography equipment multifunct... Meikon Underwater Photography equipment multifunct... 2017 Newest Underwater Tray Housings Arm for Gopro... end
Kindly Note: Please Kindly tested the waterproof before the first use without putting the camera in. Great thanks.
Features:
1. whether rain or snow, you can have unrestricted use of your camera
2. good tightness, high mechanical strength, to protect your camera
3. dustproof, anti-staining fingerprint, easy cleaning
4. Maximum water resistant 40 meters
5. Transparent hard plastic material and waterproof, dustproof
6.Clear view the camera information and control function.
7.O ring sealed with spring-loaded.
8.1/4tripod screw on the bottom
9.Material:Polycarbonate, Abs plastic, clear plate glass, Stainless steel, EPDM rubber
10.With this special design case, every key of inside can be pressed to control freely as you want.
11.Before close the case, please coat around the joint with the lubricant grease to get the good sealing effect.
Fit Fu'ji X-T1 18-55mm Lens Materials polycarbonate
Net Size 160*125*125mm Temperature -10~40°C
Color Black Element O-ringgaske
Net weight 1200g Up to
40M/waterproof/
Shockproof
Attention before use:
1.Check whether good of performance first. Also check whether have sand and dust inside of case.
2.Must close the waterproof case and put it into underwater at least 200mm deep with 5 Minutes on condition of disassemble but waterproof oil with camera.
3.Make sure there have no water inside. Then put your camera into waterproof case.
Precautionary Measure
1. use a large number of fresh water (running water or drinking water) to thoroughly clean the outside of the waterproof shell. Higher than 40 ° C water may not use, because it will damage waterproof shell.
2. Need longer cleaning time if ever used waterproof case. Should put into water for several hours.
3. Please sure whole case into water, include Safety lock devic.
4. In order to Avoid Scratch equipment by sand and dirt, pls choose soft fabric or thin tissue paper to Gently dry water.
5. vestigital seawater will lead to corrosion metal parts equipment, it will affect button, two hinges and safety lock device
6. Use soft and clean fabric to clean equipment inside.
Package includes:
1 x Housing Case For Fu'ji X-T1 18-55mm Lens
1 x Neck strip
1 x wrist rope
1 x O-ring gasket
1 x Use manual