Kebidu 433 Mhz Remote Controls With Universal Wireless Remote Control Switch DC 12V 1CH Relay Receiver Module Transmitter
Input Voltage: 12 V, RF working mode: Superheterodyne
? Receiver sensitivity: > 97 dbm
? Transmitting distance:> 100 m ( open space)
? Decoding mode: MCU software decoding
? Remote storage: 20
? Support remote type: EV1527 learning code
? Working mode: Momentary, toggle, latching time delay (5s ,10s ,15s )
? Output terminal: NO , NC , COM
? Dimension of PCB:35 x 30 x 18 mm (L,W,H)
? Remote control battery: 2 x 3 V CR2016 button batteries
Note: Maximum input power is 250W
Remote programming
-Clearing the code :
Push the learning button on the receiver 8 times , the codes will be reset.
After clearing the code, remotes will be need to be recalibrated
-Momentary mode
Please contact us for detailed use instructions
-Learning the code : ( Toggle - Press remote button to turn on, press again to turn off.)
Press the learning key on the receiver 2 times, Wait for a moment , the LED will be off , it comes into learning state .
-Push the learning key on the receiver 3 times , the LED (on the Receiver)will blink 3 times.
When the LED is on, press the button of the remote control(You want to let it learn), Push the remote button A, LED flash for 3 times .
Push the remote button B, Led flash for 3 times .
After 3 seconds , the LED indicator will be off , Learning to succeed.
Package including
1*Receiver module
1*Remote Control (with battery)
4CH Receiver:
Working Voltage: DC12V
Product Type: 4-Channel Remote Control Switch
RF Working Mode: ASK Superheterodyne
ReceptionModulation Mode:ASK
Working Mode: Momentary/Toggle/Latched, etc.
Matching Mode: Intelligent Learning Code.
Quiescent Current:5mA
RF Frequency: 433MHz
Output Current: ≤10A
Receiving Sensitivity: >104dbm
Wiring instructions:
1. +: Connect to the positive 12V power supply
2. - : Connect to the negative electrode of 12V power supply
3. A: output; normally open end of the relay
4. B: output; relay common;
5. C: output; normally closed relay