New Ultrasonic Animal Repeller Pet Dog Solar Powered Pest Repeller Waterproof Outdoor Repellent with Motion PIR Sensor
Solar repeller drive dog instructions:1. Intense ultrasound signals scare animals. In the area of ??the animal's unpleasant ultrasonic sound, the animal is scared. When the animal enters the range the sound is activated. Therefore, animals can't get used to the sound, and the repulsion force is stronger. 2, the frequency working range is 25KHZ~61KHZ, automatic frequency conversionTechnical data:Power: solar panels and 4 x 2/3AA batteriesEffective distance: up to 8M (depending on weather and environment, 4 to 6 meters is better)Detection angle: 110° level (visual weather around)Waterproof rating: IPX4.Certificate: CE&ROHS It uses the principle of infrared detection to emit small waves while driving small animals to drive small animals. It protects your property, your garden and your courtyard from harassment by nasty stray dogs, stray cats and other small animals.Because it is a portable design product, it can be installed anywhere in your home, garden, or courtyard. This product can be used with a low-voltage power supply. When the device is turned on, there is a 2.5 second sound wave alarm, and the sound wave frequency is 5KHz, which makes it easy for people to distinguish whether the device works or not, and the device is good or bad (ultrasonic part). If after working one cycle (about 15S), no animal is sensed, it will automatically stand by, and the next time it is turned on, there will be a work beep; if it continues to work after being turned on (LED sensor light does not go out), it will always be ultrasonic, it will not appear. Work alert tone. This product is only to drive animals without any harmful chemicals. It only emits 25kHz-61kHz frequency ultrasonic waves to drive them away, without any harm to the human body, harming animals, and protecting animal species. 1) Speaker: This product can emit high frequency to drive away animals.2) PIR motion detector: This is an infrared sensor that continuously outputs signals. When it senses that a moving animal is in the detection range, it will automatically emit sound waves to drive the animals and the LEDs will light up.3) LED indicator Caution 1.Allow the animal repeller to operate continuously for best results.2.Do not cover-up the PIR sensor.3.Do not immerse repeller in the water.4.To clean the repller,use a damp-soft cloth and mild soap with water.Do not use harsh chemicals or abrasive cleaning agents that may damage the repeller.
