ANCEL BA101 12V Car Battery Charger Tester Analyzer 2000CCA 220AH 12 Volts Battery Test Car Charging Circut load Tester Tools
Why choose BST100 products?
Small compact design, scan faster and indicates test results directly. Even a beginner can use this unit to analyze any 12V batteries healthy, tells you everything about the battery: voltage, charge, cranking power, and how much life is left in the battery (level of Ohm resistance). Does it quickly and precisely.
Much wider test range (100-2000 CCA) and more accurate compared to its competitors. Test results based on JIS, EN, DIN, SAE, CCA, BCI, GB, CA, MCA and IEC Standards.
Provides check the Alternator&x27;s charging and Starter&x27;s cranking conditions. Vehicle charging system test is also available, including load voltage, unloaded voltage, ripple status and charging system status.
The BA101 battery tester is well built with a large LCD display that has white backlight and contrast adjustment, indicates test results directly. no internal batteries required and gets the power directly from the 12V battery.
It&x27;s equipped with a 3. 0 feet long cable and made of a very thick flexible insulator, much safer than others selling on the marketplace. There are 4 buttons on BA101, The up/down button for scrolling the menu. The Enter and Exit button allow for navigation back and entering menu.
Ancel BA101 Car Battery Tester 12V Digital Battery Tester Analyzer
1. Accurate tester result in miliseconds (tolerance ±15)
2. BA101 can testCCA100-2000, 30-220Ah, which is the highest CCA in the market
3. Test batterues on and off the vehicle
4.Battery life analysis, Life in percentage (%),Internal resistance value (m),Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
5. Test result based on JIS, EN, DIN, SAE and IEC standards.
6. Easily readLCD screen display
7.Quick test- input battery volume (AH), then it can show the battery status.
8. vehiclecranking system test- cranking time, voltage and status.
9.vehiclecharging system test- load voltage, unloaded voltage, ripple status and charging system status.
10. Store the testing result,print function
NOTICE:the device don&x27;t need charge.The USB port is only for printed data, when you connect the USB port, the device screen is in white color, it&x27;s normal, not quality problem.
| | |
Multiple Battery Standards Support
It can test by AH and CCA values but also applies to other test standards such as BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB. If your battery standard is AH standard, you can input the AH value to test in the "Quick Test" menu. If your battery is CCA or another standard, please input the CCA or other value to test in the "Battery in Vehicle" or "Battery out of vehicle" test menu.
| Fast and Accurate Reading
It adopts the world&x27;s most advanced conductance testing technology to date for accurate and authoritative test results. It quickly analyzes the data, usually taking 2-3 seconds to display the results. Easy to use, it can quickly and accurately identify battery problems.
| Print Data Steps
Before using the print data function, it is necessary to connect the tool to a computer via the USB cable. Once ready, please insert the CD to the computer. Install the USB driver first. Open the print software, and choose the COM Port NO. Then choose the function of print data to start printing.
|
Ancel BA101 Two Built-in Multi-Language Version
European Version: English, Spanish, French, German, Italian, Polish
Asian Version: English Japanese, Korean, Chinese
Ancel BA101 Battery Test Result
GOOD BATTERY:the battery is without any problem , please be relaxed to use.
GOOD, RECHARGE:good battery , but low current,recharge before using it.
REPLACE:The battery is near to or already reached the end of using life, replace battery, otherwise, bigger danger will be followed.
BAD CELL, REPLACE:Battery interior damaged, bad cell or short circuit, and replace the battery.
CHARGE-RETEST:Unstable battery shall be recharged and retested to avoid error Ancel BA101 Automotive 12V Vehicle Battery Testsing Steps
1. Quick test
It can make sure the battery status, including voltage, CCA, electronic resistance, rated CCA, charging value, healthy value and testing result in one second. Once input the AH value?battery rated capacity, which is marked in the label of the battery.
1). Press UP/DOWN key to select the Quick test, then press ENTER key to confirm.
2). Input the rated battery capacity?xx AH, in general, the battery capacity for 12V vehicle is above 30AH.
3). Then press enter key, the testing result will show one of these, as below Battery test result includes 5 types as following:
Good Battery: The battery is without any problem, please be relaxed to use
Good, Recharge: Good battery but low current, recharge before using.
Replace: The battery is near to or already reached the end of the using life, replace battery, otherwise, bigger danger will be followed.
Bad Cell, Replace:Battery interior damaged, bad cell or short circuit, replace battery. 2. Battery In Vehicle Test 3. Cranking Test and Charging Test Ancel BA101 Car Battery Tester Operating Parameters
System voltage: 12 Volts
Input voltage range: 9V~15V
Power requirements: No internal batteries required. Power on when hooked up during testing.
AH range: 30-220AH
Ancel BA101 Car Battery Tester Application
Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported. Ancel BA101 Test Data Print Out for WIN7
Please leave us email address to get the print out drive and software for laptop
Or download in Our Ancel official net :https://www.anceltech.com/ Package List
1* Ancel BA101
1* User Manual
1* USB Cable