Brand Name: RUIXINYU
Use: Universal,Lighting,Electric Door,Automated curtains,SWITCH
Certification: NONE
Origin: Mainland China
Wireless Communication: RF
Channel: 1
Frequency: 433 MHz
Working Voltage: DC12V
Input Voltage: 1V-250V
Output Voltage: 1V-250V
Quiescent Current: 5mA
Max current: 10A
Working temperature: -30~+80
Receiving Sensitivity: 97dbm
Amount of storage remote controls: 25 pieces
Support encoding: 1527 Leaning code / 2262 fixed code
RF Operating mode: ASK superheterodyne wireless recep
Receiving range: Open space is more than 50 meters
Remote operating mode: Momentary / Toggle/ Latched/ Delay
Application scenario: Family, Farm, Factory, Office, Supermarket
Application: Garage, Light, Automated curtains, Fan, Door, Gate, LED, Lamps, Motor
Working voltage : DC12V
Input vlotage : 1~250V
Output vlotage : 1~250V
Quiescent Current : <5MA
Max current : 10A
RF frequency : 433MHz
Working temperature : -30~+80
Receiving Sensitivity : >97dbm
Amount of storage remote controls : 25 pieces
Support encoding : 1527 Leaning code /2262 fixed code
RF Operating mode : ASK superheterodyne wireless reception
Receiving range : Open space is more than 50 meters
Remote operating mode : Momentary Mode / Toggle Mode /Latched Mode / Delay Mode
Size: 39*35*24 mm
DC 12V 1CH Remote Control Switch
Wiring Diagram:
+V : 12V + (Input).
- V: 12V - (Input).
NO: Normal Open(Output).
COM:Common(Output).
NC: Normal Close(Output).
For Door open button or Other devices switches
Output switching signal
Can replace switch control other devices
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Time delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically.
Clearing the code :
Push the learning button on the receivers for 8 times , the codes will be cleaned;
After clearing the code, all the remote control cannot work any more.
Learning the code :(momentary)
Push the learning key on the receiver once time , it comes into momentary setting mode .
Wait for a moment , the LED will be on, it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash 3 times and then come off,
learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be on , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash 3 times and then come off,
learning successfully .
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will be on,
Push the remote button A,
LED flash for 3 times .
Push the remote button B .
Led indicator flash for 3 times and then come off,
learning successfully.
A = ON , B = OFF .
Learning the code :( Time delay mode )
Push the learning key on the receiver forth time , the time dealy for 5 seconds .
Push the learning key on the receiver fifth time , the time delay for 10 seconds .
Push the learning key on the receiver sixth time , the time delay for 15 seconds .
The LED indicator will be off .
Push the remote button , LED flashes and off .
After 3 seconds , the LED indicator will be on again , learning successfully .
NOTE: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .