8 Slots 18650 Battery Charger

Features:

1. Use DC12.0V 4.0A (minimum) input, intelligent charging and microcomputer management system for each slot.

2. The biggest highlight of this charger is that it can charge multi-channel 2 ampere current at the same time and quickly charge 9V Ni-MH rechargeable battery.

3. There are five levels of charging current 0.30A/0.50A/0.70A/1.00A/2.00A.

4. There are multiple safety protection functions such as overcharge, overdischarge, short circuit, reverse connection, etc., and it can intelligently and automatically identify bad batteries.

5.With 0 V voltage activation function, 1.65-2.20V cannot be charged (but there will be an activation current trickle type charging).

Descriptions:

When charging, the LCD can display the battery

symbol/channel CH and the battery type/charging current A/battery

voltage V/charging time h/charging capacity mAh and percentage %/battery

internal resistance mΩ and other data; standby display "null" ", when

the channel is short-circuited or the battery is reversed, it will

display "Err". When the battery is full, the data on the LCD will be

saved, showing 100%, and the battery symbol will not move; each slot

corresponds to a red and green indicator LED light, The red light is on

when charging, the green light is on when in standby and when the

charging is stopped, and the red light wheel flashes when the battery or

the channel is abnormal (short circuit/reverse connection, etc.)

Specifications:

Material: Plastic

Color: Black

Input power: DC 12.0V 4.0A

Output voltage: DC 4.20V for Li-ion

DC 4.35V for IMR

DC 3.65V for LiFePO4

DC 1.48V for NiMH/Ni-cd

DC 9.0V for NiMH

Output current:

Li-ion/IMR/LiFePO4: 2.00A*4 (only the 1/3/6/8 channels), 0.30A /0.50A/0.70A/1.00A*8

NiMH/Nicd: 0.50A*8

NiMH-9V: 85mA*2

Constant current/constant voltage charging, cut-off current: 100mA

No-load standby current: <50mA

Compatible battery types and models:

Li-ion / IMR/LiFePO4: 26650, 21700, 20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440

NiMH/Cd: AA, AAA, SC/C

Size: 195.0mm×142.5mm×35.0mm (length/width/height)

Type :EU ,US optional

Package included:

1 x Lii-S8 Battery Charger

1 x car charger

Notes:

1. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.

2. Please allow slight dimension difference due to different manual measurement.

6 Slots 18650 Battery Charger

Warning:
1. This charger can only charge cylindrical lithium-ion batteries (3.70V/3.85V), nickel-hydrogen/nickel-cadmium (1.2V), and lithium iron phosphate batteries (3.20V);
2. Before use, please refer to the manual carefully, pay attention to the recommended charging current of the rechargeable battery, and do not charge it beyond the recommended current;
3. Choose to use a 5VDC adapter, and the output current needs to be no less than 2A (amperes);
4. The charger may heat up when charging, so be careful not to get burned; please charge it out of the reach of children;
5. When you stop using, please unplug the power and unplug the battery;
6. It can only be used indoors at room temperature;
7. The test data of this product is for reference only, please refer to the professional instrument for the actual situation.

Charger specifications and functions:
1. Adopt DC5.0V2A (nominal) input, four-slot independent charging and microcomputer management system;
2. The biggest highlight of this charger is that it can charge the battery regardless of polarity
3. There are three levels of charging current 0.5A/1.0A/2.0A, the default is 0.5A charging, you can long press the corresponding button to select the charging current;
4. When charging, the LCD can display the channel CH and the charging current, voltage, time, capacity and battery type Li-Fe3.20V/
Li-ion 3.70V/Li-ion 3.85V (IMR); the total charging current of the two tanks does not exceed 2A, that is, when one tank is charged with 2A current, and then the battery is charged in the other tank, the first 2A current will drop Charge to 1A current; when the battery is full, the LCD will display FULL;
5. It can automatically identify lithium (Li-Ion 3.70V) batteries and nickel-metal hydride (Ni-MH) batteries, manually select lithium iron phosphate batteries (3.20V) and Li-Ion 3.80V battery (IMR);
6. With 0 V voltage activation function, 1.65-2.20V can not be charged (but there will be active current trickle charging).
7. There are multiple safety protection functions such as overcharging, overdischarging, short circuit, etc. It can also intelligently and automatically identify bad batteries;
8. Charging mode: constant current and constant voltage.

buttons and display:
1. Buttons (Mode): 4 buttons each control a slot, within 5 seconds after the battery is powered on, click the Mode button in the corresponding slot to select the type of rechargeable battery, long press the Mode button to select the charging current, and be elected After setting the type of rechargeable battery (such as 3.20V/ 3.80V) and charging current, stop the operation, and enter the charging state after 5 seconds; during the charging process, you can click the button to query the battery capacity/charging time/battery voltage;
2. LCD: After the charger is connected to the power supply, the LCD display will display for about 2 seconds and then display null. When a battery is detected, the LCD will display the corresponding slot number, battery voltage and current, and the battery type symbol flashes (NiMH/ Nickel-cadmium 1.2V without battery type symbol flashing), after 5 seconds, it will enter the default recognition to charge the battery. At this time, the charging display "V" symbol flashes to indicate that the charging is in progress, and it will display FULL when the charging is completed;

*LCD display reference diagram is as follows:

electrical technical parameters:
1. Input power: DC 5.0V 2A
2. Output voltage: DC 4.20V for Li-Ion
DC 4.35V for IMR
DC 3.65V for LiFePO4
DC 1.50V for NiMH/NI-Cd
3. Output current (optional): Li-Ion/IMR/LiFePO4: 2000mA*1 (only one line)/1000mA*2/500mA*4 NiMH/NiCd: 500mA
4. Constant current/constant voltage charging, cut-off current: <100mA;
5. No-load standby current: <15m A;
5. Compatible battery types and models Li-ion / IMR/LiFePO4: 26650, 21700, 20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440 NiMH/Cd: AA, AAA, SC, C

charger size:
118mm×100.0mm×30.0mm (length/width/height)
Weight: 136.4 g (without data cable)

4 Slots 18650 Battery Charger

Warning:
1. This charger can only charge cylindrical lithium-ion batteries (3.70V/3.85V), nickel-hydrogen/nickel-cadmium (1.2V), and lithium iron phosphate batteries (3.20V);
2. Before use, please refer to the manual carefully, pay attention to the recommended charging current of the rechargeable battery, and do not charge it beyond the recommended current;
3. Choose to use a 5VDC adapter, and the output current needs to be no less than 2A (amperes);
4. The charger may heat up when charging, so be careful not to get burned; please charge it out of the reach of children;
5. When you stop using, please unplug the power and unplug the battery;
6. It can only be used indoors at room temperature;
7. The test data of this product is for reference only, please refer to the professional instrument for the actual situation.

Charger specifications and functions:
1. Adopt DC5.0V2A (nominal) input, four-slot independent charging and microcomputer management system;
2. The biggest highlight of this charger is that it can charge the battery regardless of polarity
3. There are three levels of charging current 0.5A/1.0A/2.0A, the default is 0.5A charging, you can long press the corresponding button to select the charging current;
4. When charging, the LCD can display the channel CH and the charging current, voltage, time, capacity and battery type Li-Fe3.20V/
Li-ion 3.70V/Li-ion 3.85V (IMR); the total charging current of the two tanks does not exceed 2A, that is, when one tank is charged with 2A current, and then the battery is charged in the other tank, the first 2A current will drop Charge to 1A current; when the battery is full, the LCD will display FULL;
5. It can automatically identify lithium (Li-Ion 3.70V) batteries and nickel-metal hydride (Ni-MH) batteries, manually select lithium iron phosphate batteries (3.20V) and Li-Ion 3.80V battery (IMR);
6. With 0 V voltage activation function, 1.65-2.20V can not be charged (but there will be active current trickle charging).
7. There are multiple safety protection functions such as overcharging, overdischarging, short circuit, etc. It can also intelligently and automatically identify bad batteries;
8. Charging mode: constant current and constant voltage.

buttons and display:
1. Buttons (Mode): 4 buttons each control a slot, within 5 seconds after the battery is powered on, click the Mode button in the corresponding slot to select the type of rechargeable battery, long press the Mode button to select the charging current, and be elected After setting the type of rechargeable battery (such as 3.20V/ 3.80V) and charging current, stop the operation, and enter the charging state after 5 seconds; during the charging process, you can click the button to query the battery capacity/charging time/battery voltage;
2. LCD: After the charger is connected to the power supply, the LCD display will display for about 2 seconds and then display null. When a battery is detected, the LCD will display the corresponding slot number, battery voltage and current, and the battery type symbol flashes (NiMH/ Nickel-cadmium 1.2V without battery type symbol flashing), after 5 seconds, it will enter the default recognition to charge the battery. At this time, the charging display "V" symbol flashes to indicate that the charging is in progress, and it will display FULL when the charging is completed;

*LCD display reference diagram is as follows:

electrical technical parameters:
1. Input power: DC 5.0V 2A
2. Output voltage: DC 4.20V for Li-Ion
DC 4.35V for IMR
DC 3.65V for LiFePO4
DC 1.50V for NiMH/NI-Cd
3. Output current (optional): Li-Ion/IMR/LiFePO4: 2000mA*1 (only one line)/1000mA*2/500mA*4 NiMH/NiCd: 500mA
4. Constant current/constant voltage charging, cut-off current: <100mA;
5. No-load standby current: <15m A;
5. Compatible battery types and models Li-ion / IMR/LiFePO4: 26650, 21700, 20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440 NiMH/Cd: AA, AAA, SC, C

charger size:
118mm×100.0mm×30.0mm (length/width/height)
Weight: 136.4 g (without data cable)

2 Slots 18650 Battery Charger

Warning:
1. This charger can only charge cylindrical lithium-ion batteries (3.70V/3.85V), nickel-hydrogen/nickel-cadmium (1.2V), and lithium iron phosphate batteries (3.20V);
2. Before use, please refer to the manual carefully, pay attention to the recommended charging current of the rechargeable battery, and do not charge it beyond the recommended current;
3. Choose to use a 5VDC adapter, and the output current needs to be no less than 2A (amperes);
4. The charger may heat up when charging, so be careful not to get burned; please charge it out of the reach of children;
5. When you stop using, please unplug the power and unplug the battery;
6. It can only be used indoors at room temperature;
7. The test data of this product is for reference only, please refer to the professional instrument for the actual situation.

Charger specifications and functions:
1. Adopt DC5.0V2A (nominal) input, two-slot independent charging and microcomputer management system;
2. The biggest highlight of this charger is that it can charge the battery regardless of polarity
3. There are three levels of charging current 0.5A/1.0A/2.0A, the default is 0.5A charging, you can long press the corresponding button to select the charging current;
4. When charging, the LCD can display the channel CH and the charging current, voltage, time, capacity and battery type Li-Fe3.20V/
Li-ion 3.70V/Li-ion 3.85V (IMR); the total charging current of the two tanks does not exceed 2A, that is, when one tank is charged with 2A current, and then the battery is charged in the other tank, the first 2A current will drop Charge to 1A current; when the battery is full, the LCD will display FULL;
5. It can automatically identify lithium (Li-Ion 3.70V) batteries and nickel-metal hydride (Ni-MH) batteries, manually select lithium iron phosphate batteries (3.20V) and Li-Ion 3.80V battery (IMR);
6. With 0 V voltage activation function, 1.65-2.20V can not be charged (but there will be active current trickle charging).
7. There are multiple safety protection functions such as overcharging, overdischarging, short circuit, etc. It can also intelligently and automatically identify bad batteries;
8. Charging mode: constant current and constant voltage.

buttons and display:
1. Button (Mode): 2 buttons each control a slot, within 5 seconds after power is put into the battery, click the Mode button of the corresponding slot to select the type of rechargeable battery, long press the Mode button to select the charging current, and you are elected After setting the type of rechargeable battery (such as 3.20V/ 3.80V) and charging current, stop the operation, and enter the charging state after 5 seconds; during the charging process, you can click the button to query the battery capacity/charging time/battery voltage;
2. LCD: After the charger is connected to the power supply, the LCD display will display for about 2 seconds and then display null. When a battery is detected, the LCD will display the corresponding slot number, battery voltage and current, and the battery type symbol flashes (NiMH/ Nickel-cadmium 1.2V without battery type symbol flashing), after 5 seconds, it will enter the default recognition to charge the battery. At this time, the charging display "V" symbol flashes to indicate that the charging is in progress, and it will display FULL when the charging is completed;
*LCD display reference diagram is as follows:

electrical technical parameters:
1. Input power: DC 5.0V 2A
2. Output voltage: DC 4.20V for Li-Ion
DC 4.35V for IMR
DC 3.65V for LiFePO4
DC 1.50V for NiMH/NI-Cd
3. Output current (optional): Li-Ion/IMR/LiFePO4: 2000mA*1 (only one line)/1000mA*2/500mA*2 NiMH/NiCd: 500mA
4. Constant current/constant voltage charging, cut-off current: <100mA;
5. No-load standby current: <15m A;

Compatible battery types and models
Li-ion / IMR/LiFePO4: 26650, 21700, 20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440
NiMH/Cd: AA, AAA, SC, C

charger size:
118.5mm×63.0mm×30.0mm (length/width/height)
Weight: 84g

1 Slot 18650 Battery Charger

USER MANUAL

This charger is designed for portable, flexible and multi types of battery. It can detect the battery polarity, battery type and charge thebattery automatically under your selected charging current. Built-in digital tube indicator to display the charging real-time status

Features:

Ø One-slot charging andmanagement system, Micro USB DC 5V input port

Ø Battery polarity auto-detection ( Any Polarity)

Ø 500mAh/1000mAh charging current for selection

Ø Built-in digital tube indicator shows the real-time charging status of voltage and current

Ø Identify Li-ion and Ni-MH battery automatically

Select manually by short-press the mode button for IMR battery(3.80V Li-ion )and LiFePO4 battery(3.2V)

Ø Activation function for 0V battery of PCM protection.

Ø Can not charge battery with 0.0≤U<0.2V for NiMH/Cd and 1.6≤U<2.2V for Li-Ion

Ø Over-charging and over-discharge protection

Ø Identify broken/defective battery

Ø Charging under constant voltage and current

Operation instruction:

Ø There’s a‘MODE’ button for choosing the battery types and charging current

u Long press the‘MODE’ button for 3 seconds to change the charging current, you can change the charging current at any time

u Short press the‘MODE’ button to change the charging types of lithium batteries. If no setting, it will default as 1.2V Ni-MH or 3.7V li-ion battery automatically. You need to change the mode for 3.80V li-ion and 3.20VLiFePO4 battery

u It begins to charge the battery 5 seconds after your settings

Ø Connect the 5V input port with USB cable inserting the battery then the digital indicator showing the voltage with”V” flashing(charge starts). When no battery isinserted or defective battery is inserted, the charger will have no any response showing“null” ; When the battery is fully charged, it shows “Full”

Ø It can display the battery voltage and charge current by short press the‘MODE’ button at any time during charging

Specifications

Input: Micro USB DC 5V/1A(min.)

Output voltage: DC 4.2V 500mA/ 1000mA for Li-Ion

                          DC 4.35V 500mA/ 1000mA for IMR

                          DC 3.65V 500mA/ 1000mA for LeFePO4

                         DC 1.48V 500mA/ 1000mA for NiMH/NI-Cd

Constant voltage charging withcut-off current less then 100mA

Standby current: No more than 15mA

Compatible for Batteries:

Li-ion / IMR/LiFePO4: 26650,21700,18650, 18490, 17700, 17500, 16340(RCR123), 14500, 10440

Ni-MH/Cd: AA, AAA, A, SC, C size

Size(mm)/Weight(grams):

Length 115mm x Width 38mm xHeight 29mm

45 grams (charger) +17grams (USB cable) included in delivery