Bullet Points:
1、10 Gas Lampshades: When tightening the strap, don&x27;t pull it too tightly before tying it. There are a total of 10 gas lampshades in the set, which are large in quantity, light in weight and convenient to carry, which can satisfy your life and consumption when going out.
2、Easy to Install: The lampshade is easy to install. It is suitable for most brands of gas lamps, kerosene lamps, etc., bringing you more convenience and colorful light.
3、Premium Material: The lampshade is made of rayon and the diameter is about 10 cm/3.94 in.
4、Long Service Life: The lampshade is made of incombustible fabric, which is non-combustible, can withstand high temperature and abrasion, durable, and has a long service life.
5、Wide Application: It can be used as a portable kerosene lampshade, suitable for outdoor sports such as picnics, camping, self-driving tours, etc., and has a wide range of uses.
How to Use the Wick:
1. Take down the lid of the gas lamp and the glass army, put the lamp yarn opening into the lamp cap, and gently pull the rope to tie the knot.
2. Tighten the lamp cap to reduce the excess drawstring.
3. Use a match or a lighter to ignite the bottom of the lampshade to let the flame burn from bottom to top.
Precautions for the Use of Wicks:
1.The white wick is easy to shatter. When assembling, pay attention to the glass and cover and other parts not to be touched.
2.If the damaged wick is used, it is easy to overheat and cause the product to deform or become the cause of broken glass. Please pay attention
3.Be careful when replacing the damaged wick. Take down the wick from the product upside down. Do not let the wick fragments invade the inside of the lampstand, which may cause damage to the lamp.
Specifications:
Name: Single-capped Lamp Wick
Model: Single-capped Light 500/600
Single weight: about 4g
Standard: about 100mm/3.94 in
Material: Rayo
Packing List:
Single-capped Lamp Wick*10
Note:
Due to the lighting effects and shooting angles, there is color difference in the product, please understand.
Due to manual measurement, there is a tolerance in the product size.