February 2022: Before SucceX-E F7 flight controller changed to BLITZ F7 flight controller.
April 2022: Before SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC changed to BLITZ E45S 4-in1 ESC (6S Version)
Description:
Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don&x27;t worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam
Tips:
HIGHLIGHTS:
5mm arm design for more durability
Easy-Swap arms
LED illuminated Logo
XING-E Pro 2207 motors and NAZGUL F5 props
5" version also fits 5.1" style propellers
Popular True-X configuration
TPU crash-guards
Fits both 30.5x and 20x stacks
XL5 V5 frame specs:
SucceX-E F7 45A flight stack
XING-E Pro 2207 FPV Motor(6S 1800kv / 4S 2750kv)
Wheelbase: 240mm*240mm
Body size: 170*170mm
Propeller size: 5 inch /5.1 inch
FC pattern: 30.5*30.5/20*20 mm
FPV cam spacing: 19mm
Weight: 393.4g (without battery)
PRE-TUNED & PRE-SETUP:
Don&x27;t worry about tuning, we did that for you already A basic PID- and Filter tuning was applied for a great flight experience
To restore lost tunes or updates, please check our linked article on"Firmware/Factory Dumps"
Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn&x27;t end in a mess
Please check our linked article on"How to disable Angle-Mode, activate Acro-Mode"
Nazgul5 V2 Quad BNF Included Components and Parts
Prebuilt and tested Quadcopter
1x XL5 V5 Frame
1x RaceCam R1 Mini 1200TVL 2.1mm 19*19
1x Albatross RHCP SMA 5.8g antenna
2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)
Changelog:
May 31st,2021: Before SucceX-E F4 Stack changed to SucceX-E F7 Stack.
June,2021: Before Caddx Ratel camera changed to RaceCam R1 Mini camera.
FC // SucceX-E F7 Flight controller
MCU: STM32F22RET6 216MHz
Gyro: MPU6000
Baro: DPS310(Barometer can only be used with Betaflight 4.3.0 and above)
OSD: IFLIGHT OSD(AT7456E)
BEC: 5V 2.5A
BlackBox: 16MB
Uart: 4*UART(UART1、UART2、UART4、UART5)
UART1 for VTX HD(for 4-6S Vista,for 4S DJI Air Unit)/AnalogTelemetry
UART2 for Receiver
UART4 for Free
UART5 for ESC Telemetry
4×Dshot/PWM outputs
Smartaudio & IRC Tramp VTX protocol supported
WS2812 led Strip:Yes
Bepper:Yes
Firmware:IFLIGHT_SUCCEX_E_F7
Outer Size:36*36mm /30.5*30.5/φ4mounting
Weight: 6.9g
ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
Dimension: 36*43mm
Mounting Holes: 30.5*30.5mm/Φ3mm
Weight: 15g (without wire)
Supports 2-6S Lipo input
EFM8BB21MCU,24Mhz Runs BLHeli_S16.XFirmware
Current sensor: YES
BEC: NO
Constant: 45A / Burst: 50A
Supports: DShot150/300/600/MultiShot/OneShot etc.
Target:G-H-30 BLS 16.7
VTX// SucceX Force 5.8g 800mW VTX Adjustable
The output power is stable;
Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
Output 48 frequency points,
Frequency lock fast, the boot does not interfere with companions;
Built-in output power self-check function;
Full format video format: NTSC /PAL;
Wide input voltage range. low power consumption: 7V~36V,+12V/380mA@800mW;
Small size:36*36*3mm
Mounting holes 4-M3
Lightweight: 7.2g(excluding antenna)
Specs:
Item: SucceX-Force 800mW adjustable VTX
Input voltage:
Output voltage/ Max current: 5V 1A
12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW,250mA@500mW, 380mA@800mW
Output 48 frequency points,
size:36*36*3mm
PIT/25mW/200mW/400mW/800mW
Additional Suggested Parts(not include)
Battery 4S 1550mAh
Battery 6S 1300mAh
GoPro Mounts
Important:
Our current frsky receivers default version in 2.XX, requires to use the same version of frsky transmitter.
If you have none frsky transmitter,please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.