Intelligent Pulse Repair Automatic Identification 12V/24V (6-400AH) High Power 260W Car Motorcycle Lithium Battery Charger
400AH Full Automatic Car Battery Charger Intelligent Pulse Repair universal lithium battery 12V/24V Truck Motorcycle Charger Intelligent computer chips are adopted for whole process control with advanced technologies of pulse width modulation (PWM).
This series of products feature small size, safety and flexibility, high conversion rate, stable output current, large designed volume, long-time duration, etc.
Car Battery Charger power:240W
Output voltage: 12/24V
Input Voltage:AC-150V-250V
Output current:12V-12A 2V-10A
Capatity:6-400AH
dimension:180*145*70mm Suitable for 12/24V (6-400) motorcycles, cars, trucks, dry batteries, water batteries, lead-acid maintenance-free batteries, lithium batteries (including wet and dry)
5-Stage Mode Constant current mode: when battery voltage is lower than charger preset voltage, the working mode is constant current charging mode, where constant charging current is provided by the charger to battery. In this mode, both battery and charger are under good protection.
Constant voltage mode: Adoption of pulse width modulation (PWM) can have precise control of charging current and output voltage so that the battery can be fully charged while at the same time not over-charged.
Trickle mode: When battery voltage decreases to preset value, charging current will decrease gradually to preset value, and the charger will go into trickle floating charging mode from either constant current mode or constant voltage mode. Even if charging is completed, battery can still be set in floating charging mode.
Short circuit protection: In case of accidental short circuit, the charger will close automatically without current output, and beep for alarming. Once correctly connected, charging process will be resumed.
Reverse connection protection: Whenever positive poles and negative poles of the charger and the battery are not connected correctly, the charger will close automatically without current output, and beep for alarming. Once correctly connected, charging process will be resumed.
Low voltage protection: When single cell voltage is below 1.5V, the charger can not be started up, and beep for alarming. This mechanism is to avoid possible damages caused up by voltage discrepancy between the battery and the charger.
Charging operation :
Step 1, Examine and make sure rated voltage of battery is conforming to output voltage of charger.
Step 2, Connect correctly the charger and the battery.
Step 3, Examine and make sure mains supply voltage is conforming to input voltage of the charger.
Step 4, Connect mains supply and the battery, watch to see if the indicator is on and the cooling fan is working when charging.
Step 5, if the charger refuse to work, turn off mains supply immediately and check all the connecting cables between mains supply, the battery and the charger.