DIY Kit , need you solder it by yourself.
?The lower distortion, better control and resolution
?Single differential input, single-ended voltage amplifier stage, three-stage inverted Darlington output.
?The output stage uses the original KTB817, KTD1047
?PH-ILIPS KEC transistor, ST, EVOX producing CBB capacitor.KEMET, TDK monolithic capacitors.
Luxury version finished board with original imported Sanken highest-end model high-power tube LAPT series 2SA1295 2SC3264
Specification:
-Supply Voltage : DC + -15V to + - 45V dual AC 12V- dual 32V
-Output Power: 15-100W 8ohm (+ - 42V)
-Voltage Gain : 34times
-Input Sensitivity: 1.2V100W 8 ohm
-SNR: More than 98DB
-Distortion: <0.009 THD 1K HZ 10W
-Output Stage quiescent current per channel Approximately 30MA
-PCB Dimension: 77mm * 74mm
Installation: 649 669 must be installed on supporting the radiator.
After the installation does not require any adjustment, the quiescent current of each tube about 30MA. This version does not need to fly line. Just take two bassoon installed in the radiator can be.
Package :
1Pair MX50 SE 2 channels Power Amplifiers Audio Diy Kit